NTSB: Design Errors Factor In Minneapolis Bridge Collapse
Federal safety investigators say serious design errors in steel plates connecting beams in a Minneapolis bridge were a factor in the bridge’s deadly collapse last year.
Published: November 13, 2008
Updated: November 13, 2008
WASHINGTON (AP) - Safety investigators say more than a half million pounds of construction materials had been piled on the Interstate 35W bridge directly above steel plates on the day they failed, causing the bridge to collapse.
Investigators told the National Transportation Safety Board that workers had begun stacking material on the bridge in July. By Aug. 1, 2007, the stockpile had stretched onto the span that initially gave way.
During that evening’s rush hour, the bridge shuddered and then tumbled into the Mississippi River, killing 13 and injuring 145.
Investigators say the thickness of the steel plates was the key problem, but they will offer a safety recommendation for the board to approve regarding storing of construction materials on bridges.
(Copyright 2008 by The Associated Press. All Rights Reserved.)
Advertisement
Reader Reactions
The bankruptcy of Enron, the terrorist attack on 9/11, the collapse of the Ted Williams tunnel in Boston were all information failures. This collapse could have been prevented. Chris Burns provides answers to how to <a >prevent major disasters</a> in his book “Deadly Decisions”.
http://www.deadly-decisions.com/
Advertisement